Peugeot 3008

Peugeot 3008 - new 'crossover' model and Peugeot's first hybrid set to arrive in the UK towards the end of this year

Four turbo diesel, one turbo petrol and one naturally aspirated petrol engine available at launch, with a hybrid drivetrain planned before 2011.

The 3008 is based on Peugeot’s short wheelbase platform 2, which was chosen due to its exceptional rigidity and excellent acoustic and vibration properties.

The 3008 structure has been carefully designed to provide maximum secondary safety as well as provide a structure with the same level of rigidity of that of a saloon. To reduce emissions and, therefore fuel consumption and running costs, the weight of the vehicle was kept to a minimum.

Hybrid 4 Technology
This name describes the hybridisation of a traditional engine with an electric motor, in an original layout in engineering terms that also allows the possibility of four wheel drive.

While the traditional engine is located as usual under the bonnet and drives the front wheels, the electric motor is located under the load area floor adjacent to the rear suspension. This technology not only represents a real breakthrough in terms of fuel consumption and CO2 emissions (a reduction of around 35%), but also in terms of four wheel drive.

At the Paris Motor Show, the Prologue Hybrid 4 concept car was presented with a 2.0 litre HDi FAP engine with a power of 163 bhp and an electric motor with a maximum capacity of 37 bhp providing a maximum torque of 300 Nm at the front and 200 Nm at the rear. Despite this performance, its fuel consumption in the combined cycle is only 4.1 litres / 100 km, with CO2 emissions of just 109 g/km!

This technology makes it possible to combine dynamic performance with respect for the environment, while at the same time maintaining the benefits of a spacious vehicle.

Another important benefit is that there are no mechanical connections between the front diesel engine and the rear electric motor, everything is controlled electronically “by-wire”. This avoids any architectural constraints affecting the interior space and style of the passenger compartment.

The HYbrid 4 technology, which is still under development, was incorporated into the 3008 programme from the very outset, since it is fully consistent with the approach adopted for the vehicle. In accordance with the announcement made at the Paris Motor show, the 3008 will be the Group’s first vehicle to be equipped with Hybrid 4 technology. The commercial launch of this four wheel drive hybrid cross-over is planned between now and 2011.

Styling
At the front, the Peugeot design genes have evolved to match the car’s generous volumes while still setting it apart from what has gone before. The streamlined headlamps are expressive in a new and original way, both dynamic and reassuring. The single front grille helps create the effect of a luxury off-roader, with a look reminiscent of the world of the SUV. At the rear, the use of a split rear tailgate as on the 4007, further illustrates the “Outdoor” spirit of the 3008.

Inside the 3008
The driving position of the 3008 resembles in many ways that of an aircraft’s cockpit, as it is truly designed for the user in mind. The fascia is uncluttered and elegant allowing a particularly good view of the outside.

The use of high quality materials throughout the interior creates a high level of perceived quality, both visually and to the touch.

The roomy passenger compartment ensures comfort for every occupant. The passenger like the driver benefits from a raised seating position. In addition, rear passengers have ample leg room, helped by the interior passenger compartment length of 1,690 mm and rear headroom of 876 mm.

By day, occupants also benefit from the light coming from the large glazed area, including 1.70 m2 from the front windscreen. An optional or standard glass panoramic roof is also available with a surface area of 1.60 m2, virtually equivalent to that of the 308 SW.

The 3008 benefits from the most efficient air conditioning unit fitted to a platform two vehicle. The high volume air flow is distributed by four individual vents mounted in the fascia panel, heating ducts for the feet of the front rear occupants, and two adjustable vents for the rear passengers. Two levels of air conditioning are available: manual or automatic. The latter can be adjusted individually by each of the front occupants and benefits from a new feature, the Air Quality Sensor (AQS). This function, linked to an air quality sensor located upstream of the passenger compartment air intake, automatically controls the closure of the air recirculation flap if a high level of outside pollution is detected.

Inside the 3008 offers occupants nearly 50 litres of storage space, three 12v power connections and according to the version, the rear occupants can also benefit from side sun-blinds and / or dark tinted windows.

The 3008 benefits from an accessible and intelligent load space. Access is made easy by the split tailgate of which the lower tailgate flap can become a seat or be used to support a weight of 200 kg. Inside the load area floor can easily be compartmentalised thanks to the cleverly designed floor with its three adjustable positions. The load area has a constant width of 1,030 mm and a capacity of 512 litres or 1604 litres with the rear seats folded. On certain models the load area interior light is also a rechargeable portable torch as in the 308 SW.

To assist the driver the 3008 can be equipped with a “Head Up Display” which communicates all essential information such as vehicle speed, cruise control/speed limiter and distance alert information. The Distance Alert coupled with the “Head Up Display” uses a special radar to help the driver maintain a safe distance from the vehicle in front.

Available as standard on all engines, the 3008 is fitted with an electric parking brake enabling additional storage space to be created in the centre console. Combined with the electronic handbrake the 3008 is also available with Hill Assist for greater convenience and safety.

Directional bi-xenon headlamps, front and rear parking assistance, variable speed limiter / cruise control, tyre under-inflation detection, electric folding door mirrors, automatic headlamps / wipers and the full range of Peugeot’s in-car entertainment and telematics systems are all available on the 3008.

Suspension
Front suspension consists of an inverted pseudo McPherson design with a linked anti-roll bar, a technology that provides rigorous control and a good level of vibration filtering. The rear suspension consists of a rear torsion beam, two rear suspension arms and an integral anti-roll bar, compacted and offering excellent rigidity and body stability. The shock absorber are designed and produced by Peugeot to ensure a high level of road holding and comfort.

On versions fitted with the two highest performance engines (1.6 litre THP petrol engine and a new 2.0 litre HDi FAP diesel engine) an all new Dynamic Roll Control system has been developed. The system, appearing for the first time in this segment of the market, further enhances the dynamic qualities of the 3008 while still retaining a high level of comfort.

The “Outdoor” abilities of the 3008 are further strengthened through an innovative traction control system, Grip Control. The system consists of an upgraded traction control system with five operation modes and special mud and snow tyres. The driver is, therefore, able to optimise the traction of both front wheels, enabling the vehicle to have a genuine ability to overcome difficult situations where the wheels have little grip.

Braking is assured by large 283 x 16 mm ventilated discs on 1.6 VTi and 1.6 litre HDi FAP versions and 302 x 26 mm discs on other models. Rear brakes are 268 x 12 mm solid discs and ESP is fitted as standard which includes traction control, hill assist, stability control, ABS, electronic brake force distribution and emergency brake assist.

Electro-hydraulic power steering is fitted to all models, which varies the assistance according to the speed of the car, speed of rotation of the steering wheel and the temperature of the power steering fluid.

The 3008 will be available with 16”, 17” and 18” wheels and both the 16” and 17” wheel options will be available with low rolling resistance tyres.

Power-train Options
Six power train options will be available at launch:

2.0 litre HDi FAP: 150 bhp – six-speed manual gearbox
2.0 litre HDi FAP: 163 bhp – six-speed automatic gearbox
1.6 litre HDi FAP: 110 bhp – six-speed manual gearbox
1.6 litre HDi FAP: 110 bhp – six-speed electronically controlled manual gearbox
1.6 litre THP: 150 bhp – six-speed manual gearbox
1.6 litre VTi : 120 bhp – five-speed manual gearbox

Safety
The 3008 benefits from the Group’s extensive experience and the use of the latest technology to provide the best possible protection for all its occupants. The structure and restraint systems are designed to achieve a five star rating under the new 2009 EuroNCAP standards. Six airbags are available combined with five three-point inertia reel seatbelts and an audible fasten seat belt warning system. The two outer rear seats are also fitted with Isofix child seat mountings.

The 3008 range will go on sale in the UK at the end of 2009 and more information concerning specification and prices will be announced nearer the launch date.